A Closer Look At Colloidal Silver By Peter A. Lindemann,
Developer of the CS-300 and Quik Silver Colloidal Silver Generators.
During the last two years, a number of books and articles have appeared in
public on the subject of colloidal silver. Some of these include: the
Bio-Tech News Report, "Hi-Yo Silver"; Colloidal Silver, The Natural
Antibiotic Alternative, by Zane Baranowski; Colloidal Silver, by Tonita
d'Raye; and "Banishing Disease with Three Nine Volt Batteries", parts I + II,
by Mark Metcalf. Literally hundreds of other newsletters and small
publications have repeated the information in these articles without checking
the content for accuracy.
The appearance of these materials two years ago was the first wave of public
education concerning colloidal silver. Today, most Health Food Stores carry
and sell several brands of colloidal silver, scores of MLM companies have
colloidal silver products in their lines, and prices are starting to drop.
While it is still possible to spend as much as $10/oz. for colloidal silver
in Health Food Stores, prices can be as low as $5/oz. Some mail order
catalogs sell it for as little as $2.50/oz., and I have seen small classified
ads selling it for $1/oz. The trend is definitely toward a lower price.
One of the phenomena driving the price down is the appearance of the devices
that allow people to make their own colloidal silver. At this time, (Spring
1997) the cottage industry of colloidal silver generators is starting to
penetrate the larger market. This is starting to cause alarm in high places.
One major commercial manufacturer of colloidal silver has recently issued a
warning statement to its customers, alerting them to the dangers of the
"inferior quality" of colloidal silver made by these devices. CNN and other
major media have also tried to scare the public away from colloidal silver by
showing a blue-skinned person who "suffers" from Argyria, a cosmetic
condition caused by the build-up of silver compounds under the skin. Even
JAMA (The Journal of the American Medical Association) has run articles
warning of Argyria and the toxicities associated with "colloidal silver
proteins." On January 16, 1997, new labeling guidelines concerning colloidal
silver went into effect, issued by the FDA. Other FDA rulings on "safety and
effectiveness" are still pending. With all of these developments, it doesn't
take a rocket scientist to see that the whole situation around colloidal
silver is heating up!
The purpose of this article is to raise the level of public knowledge to a
higher degree of accuracy. Knowledge is power, and the public needs to know
the truth about colloidal silver. The first thing people need to know is that
there are at least FOUR different products on the market being called
The first type of product is the classic, original kind, usually called
"electro-colloidalsilver." This product is made either by the "electro-arc"
method in deionized water, or by the "low voltage electrolysis" method in
distilled water. This product is usually found in concentrations between 3-5
ppm (parts per million), but sometimes as high as 100 ppm. Properly made,
this product consists of microscopic particles of pure, elemental silver
suspended in water, with no other elements present. Each particle of silver
carries a POSITIVE electrical charge. Colloidal silver made this way appears
either transparent-clear or transparent-light yellow.
The second is called "mild silver protein." This product chemically binds
microscopic particles of silver to a protein molecule. It is usually found in
concentrations between 20-40 ppm. Its appearance may be transparent-clear or
The third are "silver salts." These products can be made either chemically or
electro-chemically and usually create a form of silver that DISSOLVES in the
water. Concentrations range between 50-500 ppm. Its appearance is
transparent-clear. The silver particles do carry a POSITIVE electrical
charge, but almost invariably, these products contain other elements or
compounds other than silver.
The fourth is sometimes referred to as "powdered silver." This product was
developed by the Russians and is made when a pure silver wire is rapidly
disintegrated by a high voltage electrical discharge, similar to an old
photographic flash bulb. The microscopic silver dust is collected and either
dissolved in water or added to salves and creams for topical use.
Concentrations range from 100-500 ppm.
All of these products work, to one degree or another, as a broad spectrum
germicide because they all contain microscopic particles of SILVER. That
said, it is important to understand a number of things:
1) all of these products are not "colloidal suspensions" of silver,
2) these products DO NOT all behave the same in the body or in laboratory
3) effectiveness and dosage varies from product to product,
4) quality varies from product to product and from batch to batch with the
same product, and
5) they are NOT all uniformly safe and non-toxic. There are no industry
standards that manufacturers voluntarily follow to assure quality control and
there is no governmental regulation of the industry.
On the other hand, there are millions and millions of satisfied colloidal
silver users who would like to have continued, free access to the product,
and a growing number of manufacturers entering the market with a wide variety
of new products. The critical factors that make a "good" colloidal silver
product are particle size, purity, concentration, and cost. The only way to
authoritatively determine the first three is by laboratory analysis. The best
way to determine particle size is by electron microscope photograph. The best
way to determine purity is by mass spectroscopy or by x-ray defraction
analysis. The best way to determine concentration is by chemical analysis of
total dissolved solids. The cost of the product should be calculated in
reference to the total quantity of silver present, such as: $5.00/oz of 100
ppm is equal to 25¢/oz of 5 ppm (the first has 20 times more silver by volume
and costs 20 times more by volume).
Making Your Own
The simplest way to control these factors is to make the colloidal silver for
yourself. By doing this, you will not know exactly what is there unless you
do laboratory testing, but you will have a pretty good idea. Without
laboratory testing of commercial products, you don't know much more, because
the quality control batch to batch is loose with most brands. Also, by making
it yourself, you will end up with real "colloidal" silver, which is the
product referred to in most of the literature.
If you are already making your own colloidal silver, please pay special
attention to this section because much of the information you now have may be
incorrect. The simplest way to make real colloidal silver at home is by the
"low voltage electrolysis" method. A few batteries may be connected to some
silver electrodes and placed in a glass of water. This process will cause
small particles of silver to be sintered off the electrodes and enter the
water. This deceptively simple method is very easy to do WRONG, and most
people who are making colloidal silver at home are making an inferior product.
It's In The Water
When you do this yourself, it is very important to control the purity of the
water, because the purity of the water is one of the factors that controls
how small the particles of silver will be. Only high quality DISTILLED water
should be used. You cannot use purified or filtered water because it still
has too many dissolved minerals in it. You cannot use deionized water because
it doesn't conduct electricity well enough to start the reaction. Distilled
water is just perfect to start the reaction slowly and let it proceed
properly. Another variable that influences particle size is the water
temperature. The warmer the water, the faster the reaction will take place,
and the smaller the particles will be.
Please Pass The Salt
Regardless of what anyone has said to the contrary, silver chloride will
ALWAYS form if any amount of salt is present. Never add anything to the water
that will make the water conduct electricity better. Never add salt, sea
salt, or Celtic sea salt to the distilled water because the salt puts
chloride ions in the water that react with the silver to form silver
chloride. Another serious problem arises when making colloidal silver with
salt in the water. The presence of salt increases the electrical conductivity
of the water and this dramatically speeds up the reaction. As the reaction
speeds up under these circumstances, it produces larger particles. The
product produced is invariably cloudy-white in appearance. Actual electron
microscope photographs of this material show silver particles in the range of
.05 to .15 microns. These particles are TOO LARGE to form a colloidal
suspension, and the proof is that the material will settle to the bottom of
the container in a very short period of time. Therefore, this home brewed
"colloidal silver" product may be dangerous to consume internally for TWO
reasons: the presence of silver chloride and the production of large
The Best Is Yet To Come
The very best voltage for the reaction is 30 volts, because the electrodes
run the cleanest at this voltage. If you have a small power supply, set it
for 30 volts. If you are running on batteries, it is best to start at 36
volts (three 12 volt batteries or four 9 volt batteries) and let the
batteries drain down from there. Holding the silver electrodes at a uniform
distance away from each other yields a better product.
When 30 volts is applied across silver electrodes held uniformly apart in
distilled water, a totally different event happens. First, the reaction
proceeds very slowly. Often, for the first 15 minutes nothing seems to be
happening. Then finally, a faint yellow mist will begin to form. Within a few
minutes, the reaction will speed up, but the particles produced will be a
golden-yellow as viewed with a flashlight. Using this method, 8 ounces of
distilled water at room temperature can be made into a 3-5 ppm colloidal
silver preparation in 20-25 minutes. Made this way, colloidal silver can cost
under 10¢/oz to make. Electron microscope photographs of this product show a
silver particle size in the range .001 to .004 microns. During manufacturing,
the particle cloud is a golden-yellow.
These particles will hang in the water at the level they are produced, and
for the most part, will not fall to the bottom of the glass. This is what a
"colloidal" preparation of silver looks like. After the particles disperse,
the water will look clear again, but may turn a light yellow if the
concentration is high enough and after the particles have become evenly
"The Yellow Color"
There has been a fair amount of controversy in the public literature
concerning the appearance of the "yellow" color. A lot of well meaning people
have told me that "yellow is bad", "silver isn't yellow", "yellow is sulfur
contamination", "yellow is iron contamination", and lots of other things. I
finally found what I believe to be the answer to this question in a book
titled Practical Colloid Chemistry, published in London in 1926. In the
section on the "Colours of Colloidal Metals", sub-section on the
"Polychromism of silver solutions" on page 69, I found the following
statements: "The continuous change in colour from yellow to blue corresponds
to a change in the absorption maximum of the shorter to longer wave-lengths
with a decreasing degree of dispersion. This is a general phenomenon in
colloid chemistry illustrating the relation between colour and degree of
dispersion." This section goes on to describe the colors that show up in a
wide variety of colloidal metal solutions. Interestingly, they ALL have a
yellow phase. For true "electro-colloidal" silver, the particle size range
that can appear yellow is .01 to .001 microns (10 to 100 angstroms) because
that is the size of silver particle that best absorbs the indigo light,
leaving only its inverse color, yellow, to be observed. The final
transparent-yellow appearance only shows up after the particles have become
The Brown Glass Bottle
Once you have gone to the trouble of making colloidal silver particles as
small as .001microns, it is important to protect them. The particles stay
away from each other in suspension because they each have a positive
electrical charge (+) and these "like charges" repel each other. Anything
that can strip this charge off the particles will degrade the quality of the
colloidal silver by a process called re-coagulation, where the particles
clump together again to form larger aggregates. Ultraviolet light from the
sun and many plastics can cause this process to occur. Therefore, colloidal
silver is best stored in dark, glass containers. The two kinds of glass
container that are suitable for this are the dark amber and the cobalt blue.
The Same Difference
The biggest "secret" about the manufacture of high quality colloidal silver
is that it is nearly impossible to standardize the product. Silver is
apparently reactive to a number of natural forces that have yet to be
identified. Even when the voltage, the water, and the water temperature are
identical, different batches will proceed at different rates on different
days. The speed of the reaction can vary by over 100% depending on the day.
On "normal" days, the reaction is proceeding well by 15 minutes, with a
visible cloud of particles. On "slow days" it may take 30 minutes before any
visible production of yellow particles begins. Because of this variation, it
is always wise to observe the reaction with a B flashlight so you can see how
quickly the reaction is happening. Once the yellow cloud starts forming, time
the batch for 5 more minutes. This is the best way to standardize your home
brewed colloidal silver.
Colloidal or Ionic?
Another big controversy surrounds the question of whether this method
produces "colloidal" silver or "ionic" silver. Most people have been told
that colloidal silver is "good" and ionic silver is "bad." Once again, the
truth might be unpopular. The word "colloidal" refers to a condition where,
in this case, a solid particle is SUSPENDED in a liquid (silver in water).
The solid particles are too large to be considered easily DISSOLVED, but are
too small to be filtered out. This colloidal condition is most easily
detected by what is called the "Tyndall effect", where a narrow beam of light
is shined through the liquid to produce a cone shaped dispersion of the
light. The particles so illuminated also exhibit a random, zig-zag activity
called "Brownian motion" when observed under a microscope. When something is
completely dissolved, both the Brownian and Tyndall effects disappear.
The word "ionic" refers to a condition where a particle has an electric
charge. In the case of "electro-colloidal" silver, this electric charge is
ALWAYS positive. Silver will not form a negatively charged ion. So, the truth
is that electro-colloidal silver is BOTH colloidal and ionic. It is
considered colloidal because of the particle SIZE and it is considered ionic
because of the particle CHARGE. In fact, most of the biological studies
suggest it is colloidal silver's ionic characteristics that make it such a
good germicide. It is also interesting to note that the old chemistry books
make no distinction between the colloidal and ionic states of the
Purity of Silver
The quality of your finished product depends entirely on the purity of the
water you start with and the purity of the silver you start with. Most of the
current literature suggests that only 99.9999% pure silver can be used. Most
home brew systems use 99.9% pure silver. So, what is the difference? To find
out, I contacted Academy Metals, a company in Albuquerque, New Mexico, that
produces commercial silver. The total allowable impurities in 99.9% (.999
fine) silver is 1000 ppm or 1 part in 1000. These impurities and their
maximums are 1) Copper, 800 ppm, 2) Lead, 250 ppm, 3) Iron, 200 ppm, and 4)
Bismuth, 10 ppm. This product is readily available in wire form and costs
about $3.00 above the market (spot) price of silver. When this product is
used to make electro-colloidal silver at a concentration of 5 ppm, the total
impurities from the silver drop to 4 ppb (parts per billion) copper, 1.25 ppb
lead, 1 ppb iron, .05 ppb bismuth. With all allowable impurities at these low
levels, there is a reasonable argument for not being concerned. Still,
sometimes small things make a big difference. 99.99% silver (.9999 fine) has
total allowable impurities of 100 ppm of the same metals in the same ratios,
and costs (in wire form) between $50-$90 above the spot price of silver.
99.999% silver (.99999 fine) has total allowable impurities of 10 ppm, and in
wire form costs about $250 above the spot price. 99.9999% silver, in wire
form, costs more than gold and is very difficult to find commercially.
In one sample of 10 ppm colloidal silver we sent out for total analysis (made
with 99.9% silver electrodes), the primary impurities found were: 1) Sodium,
470 ppb, 2) Calcium, 260 ppb, 3) Manganese, 70 ppb, 4) Potassium, 50 ppb, and
5) Magnesium, 24 ppb. Since none of these impurities could have come from the
silver, it suggests that the purity of the water should be of greater concern
to the person making their own colloidal silver, than spending extra money on
The concentration of silver in the water is usually measured in parts per
million, or ppm. While this is the standard convention, ppm is a "ratio" and
not an indicator of quantity. When a laboratory tests colloidal silver for
concentration, they report the findings in milligrams per liter (mg/L).
Milligrams per liter is an actual measurement of weight per volume, and
therefore is a real quantity measurement. In the metric system, one liter of
water weighs 1000 grams, and one milligram is one thousandth (1/1000) of a
gram, so 1 mg/L is the same as 1 ppm, as long as we are talking about water.
Silver weighs a little more than water, but the equivalence is very close,
and the terms are often used interchangeably. With this in mind, we can
calculate that one teaspoon of 5 ppm colloidal silver has about 25 mcg
(micrograms) of silver in it.
In 1940, R. A. Kehoe reported that under normal circumstances, the average
daily intake of fruits and vegetables would provide between 50-100 mcg of
silver as a trace element. Since that time, the commercial farm soils of
this country have become extremely deficient in trace minerals. Although I do
not have authoritative figures for silver, according to the Earth Summit
Report, issued in 1992, the levels of soil based minerals in North America
have dropped over 85% in the last 100 years. Assuming that our ancestor's
diet used to contain trace silver, and that our diet probably has greatly
reduced levels, there is a reasonable argument for supplementing with
colloidal silver. Two teaspoons of 5 ppm colloidal silver provides about 50
mcg of silver and could be considered a "nutritional" amount, if taken on a
daily basis. Any amount above four teaspoons a day or 100 mcg should be
considered a "therapeutic" amount. That said, it should not be assumed that
electro-colloidal silver is equivalent to or has the same metabolic effect as
receiving trace silver from dietary plant sources. But since there are very
few plant sources of trace silver available today, colloidal silver is
probably the best substitute. If you want to experiment with taking colloidal
silver for an extended period of time, stay within the amounts considered to
be nutritional. If you want to experiment with larger doses, do so with
caution, and only for a day or two at a time.
Safety and Toxicity
Silver can act as a heavy metal poison in the body. It can also act as a
trace mineral nutrient. The difference is in the particle size, NOT the
concentration. Colloidal silver with a particle size of .001 microns has
particles 100 times smaller than a preparation of silver with a particle size
of .1 microns. The smaller the particle, the less likely it will behave as a
toxin. Typically, the worst toxic reaction from metallic silver, cited in the
medical literature, is a condition called Argyria. Argyria is primarily a
cosmetic condition characterized by a permanent, bluish discoloration of the
skin. Argyria causes no physical discomfort, and does not have any other
known side effects. Your skin just looks bluish-gray. In fact, the term "blue
bloods," in reference to the royal families of Europe, probably refers to a
mild, argyrial condition caused by the constant eating of food from silver
place settings. It is interesting to note, however, that there has never been
a case of Argyria reported from the use of electro-colloidal silver, free of
salts or other impurities.
Argyria, while not being a deadly condition, certainly is undesirable. It is
usually caused by the massive intake of silver salts, such as silver nitrate,
silver sulfate, and silver chloride. To determine just how toxic these
substances are, I contacted the Agency for Toxic Substances and Disease
Registry through their on-line information service at
(http://atsdr1.atsdr.cdc.gov:8080/ToxProfiles). All of these silver salts are
talked about as toxins, but the only consequence of even high exposure in
humans that is listed is Argyria. EPA issues a "control code" for each toxic
substance it tracks that can cause human illness. Silver nitrate and silver
sulfate have control codes, but silver chloride does not. I received
essentially the same information when I spoke with Dr. Eidson at the
Department of Epidemiology in Santa Fe, New Mexico. Apparently, the
government thinks silver and silver compounds are toxins that essentially
have no significant toxic effects other than the ability to discolor your
skin. Looking just a little deeper into the situation, I pulled out Lectures
on Homeopathic Materia Medica by J.T. Kent. In the section on the use of
metallic silver as a homeopathic remedy, there are 7½ pages of indications
(symptoms) that include actions on the nerves and cartilage, as well as
increased tendency toward emotional outbursts and mental excitability. In
fact, the list of symptoms is rather extensive. So, exposure to silver may
not kill you or cause organic disease, but that may not mean there is no
Apparently, silver has the ability to act as a subtle irritant as well as
lodge in certain tissues. This suggests that taking colloidal silver every
day may not be a good idea for people who already have these symptoms.
In a study done, in part, by the Institute of Microbiology in Rome, Italy,
and published in Applied and Environmental Microbiology, in December, 1992,
various forms of silver were tested for their ability to kill
micro-organisms. Pure electro-colloidal silver out performed silver nitrate,
silver chloride, and silver sulfadiazine as a broad spectrum germicide. For
all classes of bacteria, fungus, and mold samples tested, pure
electro-colloidal silver worked better, and at much lower concentrations.
They concluded that any additives reduced the effectiveness of the pure
silver ion; the silver salts being as much as 100 times less effective.
Electro-colloidal silver's effectiveness as a broad-spectrum germicide is
directly related to the number and size of the particles. The same volume of
space taken up by one silver particle .1 microns in size, will hold about
10,000 silver particles .001 microns in size. This reduction in particle
size not only allows for a greater distribution of the silver, but it also
greatly increases the total surface area of silver available for interacting
with the environment. These, plus the stability of the electrical charge, are
the most important factors when considering the effectiveness of colloidal
While silver has been shown to be a very effective germicide, killing
gram-negative bacteria, gram-positive bacteria, yeasts, molds, and viruses in
laboratory experiments, this does not mean that it will invariably cure
disease conditions in the body caused by these organisms. Colloidal silver is
a fantastic adjunct to the home, but it is by no means a "cure-all". The
biggest obstacle to using colloidal silver as a "home remedy" is the lack of
information in the public domain on how to use it effectively in any given
situation. The FDA has tested colloidal silver extensively and found that
different micro-organisms succumb to its action at a wide variety of
concentrations and exposure times. If any of this information entered the
public domain, the FDA would consider their own research "unsubstantiated
medical claims" and reason enough to classify colloidal silver as a "new
drug." The "new drug" classification would be "required" because "new use
protocols" had been developed that did not exist before 1938.
Here is an example of the problem. It is now estimated that one in four women
will develop breast cancer in their lifetime. I have spoken to two women who
claim to have cured themselves of breast cancer with colloidal silver. They
were both diagnosed by biopsy. After the diagnosis, they took 2 teaspoons of
colloidal silver a day until their surgery. One took a home-made product, the
other took a silver protein product. In both cases, the biopsy of the removed
breast tissue and lymph nodes was cancer free. The question is, will
colloidal silver work this well for all cases of breast cancer? Probably not,
but in the current legal and political environment, we may never know. No
pharmaceutical company can control or monopolize ownership of colloidal
silver, so none of them will ever fund the testing, which currently costs
over $10 Million and takes 10 years. FDA says if you claim that colloidal
silver cures breast cancer, that would classify it as a new drug, and the
public cannot be given access to new drugs without proper testing. Using the
FDA model, it could cost the public $1-billion to "prove" to the FDA what the
FDA already knows about colloidal silver. Politics has definitely entered
this picture. FDA does not want to be exposed as an enforcer for the drug
companies, or be seen as an agency clearly not acting in the public's best
interest. While these ideas are not new to some of us, it would be a
startling revelation if a large portion of the population began thinking this
way. FDA would certainly like to avoid this "public relations" embarrassment.
The fact is, FDA has never spent our tax dollars discovering something
important, and then published their findings for the benefit of the public
at-large; especially when it involved something that was powerful, safe, and
inexpensive for the public to make for themselves. Obviously, empowering the
population to be self-reliant and frugal in relation to their own healthcare
is not the FDA's responsibility.
Colloidal silver clearly has some extraordinary capabilities and hundreds of
legitimate uses. But without standardization, quality control, and extensive
medical testing, the public will never know how best to use colloidal silver
in a given situation. FDA may yet try to restrict public access to colloidal
silver, claiming it is unsafe, even though they know how "safe and effective"
it CAN BE when used properly. In the absence of the release of this
authoritative testing data, the public is left just experimenting and groping
for the answers. A big fight over the public's access to colloidal silver may
be looming because the cost of healthcare in this country is out of control,
and the public is looking for inexpensive solutions that work. In that sense,
colloidal silver could be "just what the doctor ordered."
Colloidal silver is apparently able to kill nearly all micro-organisms,
including the "friendly flora" your digestive system needs for proper
function. I have spoken with hundreds of people who have taken colloidal
silver on a daily basis and have noticed no digestive upset, even after
prolonged use. I have also spoken to two individuals who reported digestive
upset after taking colloidal silver one time. So, in my experience, the
die-off of friendly flora is possible, but rare.
There are a number of strategies that can reduce the probability of digestive
interactions. The simplest one is to swish the colloidal silver around in
your mouth for 30 seconds before swallowing. This promotes an absorption of
the colloidal silver into the body away from the intestinal tract. Another
strategy is to take smaller doses, multiple times per day, or with meals.
Either way, if you do experience a die-off of friendly flora, they can be
re-populated by taking any of the acidophilus products on the market.
Septic tanks are like your home's intestinal tract. They only work when
populated with friendly flora. If you live in a rural area with your house on
a septic system and you are making your own colloidal silver, make sure you
don't throw a lot of it down the sink or your septic system may stop working
properly. This problem can be handled by using a product like RID-X
periodically, which is a good idea anyway.
Colloidal silver is an extraordinary product. It can enhance your health and
the health of your family in hundreds of ways. Everyone should learn how to
make high quality colloidal silver, and have that capability in their home,
in case the regulators restrict its availability at some point in the future.
This could be the best "health insurance" policy you ever implemented!
If you buy one of the colloidal silver makers on the market, make sure it can
make the "yellow" particles. When you make it yourself, make sure you are
making the "yellow" particles. If you have any doubts about the quality of
the product you are making or buying, you can send samples to any of the
following laboratories for definitive testing.
For particle size testing with electron microscope, contact: EMS
Laboratories, 117 West Bellevue Drive, Pasadena, CA 91105 (818) 568-4065
Price will be under $200 per sample.
For concentration test (mg/L) of total dissolved solids, contact: Associated
Laboratories, 806 North Batavia, Orange, CA 92668 (714) 771-6900 Call for
For elemental analysis, including "Tyndall effect" and "precipitation" test,
contact: Kimball Laboratories, 600 East 11800 South, Draper, UT 84020 (801)
571-3695 Call for prices.
These companies are busy professionals who have no idea I am listing them in
this article. Please don't waste their time unless you plan to submit samples
for testing with payment.
Agency for Toxic Substances and Disease Registry, on-line information service:
Kehoe, R. A. et al, 1940. J. Nutr. 19:579.
Kent, J.T. Lectures on Homeopathic Materia Medica, Jain Publishing Co. New
Delhi, India, reprint 1982.
Michaelis, L. The Effects of Ions in Colloidal Systems, Williams + Williams
Baltimore, MD, 1925.
Ostwald, W. Practical Colloid Chemistry, Methuen + Co. Ltd. London, UK, 1926.
Simonetti, N. et al, Electrochemical Ag+ for Preservative Use. Applied and
Environmental Microbiology. American Society for Microbiology:
Washington,1992, Vol. 58, No. 12, pp 3834-3836.
The Association for Avanced Colloid Research, 232 NE Lincoln St. Ste."G",
Hillsboro, OR 97124, private conversations.
Borderland Sciences Research Foundation, PO Box 220, Bayside, CA 95442
Special thanks to Michael Theroux for valuable research and private